M-019: Multiple Vendor CDE dtspcd Process Buffer Overflow

   
[Revision 02/22/02: Hewlett-Packard revises bulletin]
[Revision 04/17/02: Compaq Corp. releases patches]
   
[***** Start Multiple Vendor Security Bulletins *****]

[***** Start Internet Security Systems Security Advisory ISS-101 *****]

Internet Security Systems Security Advisory
November 12, 2001

Multi-Vendor Buffer Overflow Vulnerability in CDE Subprocess Control Service

Synopsis:

Internet Security Systems (ISS) X-Force has discovered a buffer overflow
in the Subprocess Control Server (dtspcd) in all Unix variants running
CDE (Common Desktop Environment) system. The vulnerability in the dtspcd
daemon may allow remote attackers to execute arbitrary commands on a 
target system with super user privilege.

Affected Versions:

Many Unix vendors are affected by this vulnerability. 

ISS X-Force has been working with CERT on this issue. Please refer
to the CERT advisory at the following address for the current list
of vulnerable versions:
http://www.cert.org/advisories/CA-2001-31.html


Description:

CDE is the default X-Windows GUI environment shipped with newer versions
of Sun Solaris and many other Unix variants. The Subprocess Control
Server daemon is not intended to be run by normal users and is spawned
by other components within the CDE system. Dtspcd is started by the
Internet services daemon (inetd) when a CDE client attempts to create a
process on the daemon’s host.

A buffer overflow condition exists in the connection negotiation routine
within dtpscd. A remote attacker can generate a specially crafted CDE
client request to take advantage of the flaw and overflow exploit code
onto the heap. The attacker can use this exploit code to execute
arbitrary commands on the target system.

The Subprocess Control Server daemon is enabled by default on all
operating systems with CDE installed. This process is run by the
"root" user and accepts remote connections by default.

Recommendations:

This advisory was tentatively scheduled for release in December 2001.
The issue was made public in the following announcement before most
vendors were able to make patches available:
ftp://stage.caldera.com/pub/security/openunix/CSSA-2001-SCO.30/

ISS X-Force encourages all affected users to check with your individual
vendors for patch availability. Users should take steps to disable or
limit access to the vulnerable service until patches are made available.

ISS RealSecure Network Sensor customers can configure a Connection Event
for port 6112 to detect potential attacks. For more information on
configuring Connection Events, refer to the RealSecure 6.0 Network
Sensor Policy Guide, or the RealSecure 5.x Network Sensor User Guide.

ISS RealSecure Server Sensor customers can configure Server Sensor to
block access attempts to the dtspc port. The following steps describe
how to add a Firecell rule to RealSecure Server Sensor (Solaris and
Linux) to block access attempts to the dtspc port. X-Force recommends
that administrators investigate the implications of blocking dtspc in
their environments before applying this rule.

1. Open the server sensor policy to which you want to add this signature.
2. Select the Protect tab, open the Protect folder, and then open the
   Firecell folder.
3. Select the TCP Inbound section.
4. Click Add to create a new signature.
5. Type a name for the firecell signature, e.g. Block_dtspcd, and then
   click OK.
   The new signature is added to the policy in the TCP Inbound section.
6. Select the signature that you just created.
   The properties of the signature appear in the right pane.
7. Set the priority of the event in the Priority box. 
8. In the Port number field, type 6112.
9. In the IP address field, select ANY ADDRESS.
10. In the Actions section, select Action (1) In the range of IP
    addresses, drop the packet and generate the responses.
11. In the Response section, select the responses you want the sensor
    to take when a match to this signature occurs.
12. Save and apply the policy to the sensor.


ISS X-Force will provide specific detection and assessment support for
this vulnerability in upcoming X-Press Updates for RealSecure Network
Sensor and Internet Scanner. ISS will also provide detection support in
an upcoming signature update for BlackICE products.

Additional Information:

The Common Vulnerabilities and Exposures (CVE) project has assigned the
name CAN-2001-0803 to this issue. This is a candidate for inclusion in
the CVE list (http://cve.mitre.org), which standardizes names for
security problems.

http://www.cert.org/advisories/CA-2001-31.html
http://www.kb.cert.org/vuls/id/172583
http://xforce.iss.net/static/7396.php

Credits:

This vulnerability was discovered and researched by Chris Spencer of the
ISS X-Force. Internet Security Systems would like to thank CERT for
their response and handling of this vulnerability. 

______

About Internet Security Systems (ISS)
Internet Security Systems is a leading global provider of security
management solutions for the Internet, protecting digital assets and
ensuring safe and uninterrupted e-business. With its industry-leading
intrusion detection and vulnerability assessment, remote managed
security services, and strategic consulting and education offerings, ISS
is a trusted security provider to more than 8,000 customers worldwide
including 21 of the 25 largest U.S. commercial banks and the top 10 U.S.
telecommunications companies. Founded in 1994, ISS is headquartered in
Atlanta, GA, with additional offices throughout North America and
international operations in Asia, Australia, Europe, Latin America and
the Middle East. For more information, visit the Internet Security
Systems web site at www.iss.net or call 888-901-7477.

Copyright (c) 2001 Internet Security Systems, Inc. All rights reserved
worldwide.

Permission is hereby granted for the redistribution of this Alert
electronically. It is not to be edited in any way without express
consent of the X-Force. If you wish to reprint the whole or any part
of this Alert in any other medium excluding electronic medium, please
e-mail xforce@iss.net for permission.

Disclaimer

The information within this paper may change without notice. Use of
this information constitutes acceptance for use in an AS IS condition.
There are NO warranties with regard to this information. In no event
shall the author be liable for any damages whatsoever arising out of or
in connection with the use or spread of this information. Any use of
this information is at the user's own risk.

X-Force PGP Key available at: http://xforce.iss.net/sensitive.php
as well as on MIT's PGP key server and PGP.com's key server.

Please send suggestions, updates, and comments to: X-Force
xforce@iss.net of Internet Security Systems, Inc.

[***** End Internet Security Systems Security Advisory ISS-101 *****]
 
[***** Start HEWLETT-PACKARD COMPANY SECURITY BULLETIN: #00175  *****]

Document ID  HPSBUX0111-175
Date Loaded  20020220
      Title  Sec. Vulnerability in dtspcd (rev. 2)

 -----------------------------------------------------------------
 HEWLETT-PACKARD COMPANY SECURITY BULLETIN #00175
 Originally issued 12 Nov. 2001
 **Revision 01** 16 Jan. 2002
 **Revision 02** 20 Feb. 2002
 -----------------------------------------------------------------

The information in the following Security Bulletin should be acted
upon as soon as possible.  Hewlett-Packard Company will not be
liable for any consequences to any customer resulting from customer's
failure to fully implement instructions in this Security Bulletin as
soon as possible.

 ------------------------------------------------------------------ 
PROBLEM  Buffer overflow in dtspcd

PLATFORM HP9000 Series 700/800 running HP-UX releases 10.10,
          10.20, 10.24, 11.00, 11.04, and 11.11.

DAMAGE  Possible unauthorized access, possible increased privileges.

** Rev.1 **
SOLUTION Install the appropriate patch for the HP-UX release
--->>>>   10.10    PHSS_25785
--->>>>   10.20    PHSS_25786
** Rev.2 **
--->>>>   10.24    PHSS_26029
--->>>>   11.00    PHSS_25787
** Rev.2 **
--->>>>   11.04    PHSS_26029
--->>>>   11.11    PHSS_25788

** Rev.1 **
** Rev.2 **
MANUAL ACTIONS None

AVAILABILITY  
** Rev.1 **
** Rev.2 **
--->>>>   The patches for 10.10, 10.20, 10.24, 11.00, 11.04,
--->>>>   11.11 are available now.

CHANGE SUMMARY ** Rev.1 ** Patches available for 10.10, 10.20,
                11.00, 11.11.
CHANGE SUMMARY ** Rev.2 ** Patches available for 10.24 and 11.04.

 ------------------------------------------------------------------ 
 A. Background
    A buffer overflow has been reported in dtspcd.  It may be 
    possible to exploit this overflow to gain unauthorized access.

 B. Fixing the problem

** Rev.1 **
** Rev.2 **
--->>>> Patches available for 10.10, 10.20, 10.24,
--->>>> 11.00, 11.04, 11.11

 C. Recommended solution

** Rev.1 **
** Rev.2 **
--->>>> Install the appropriate patch for 10.10, 10.20, 
--->>>> 10.24, 11.00, 11.04, 11.11.
--->>>> Note Some of the patches have dependencies on other patches.
--->>>>       This is documented in the patch text.

** Rev.2 **
--->>>> All patches are now available.  The ftp site which had
--->>>> temporary fix files will be deleted.


 D. To subscribe to automatically receive future NEW HP Security
    Bulletins from the HP IT Resource Center via electronic
    mail, do the following

    Use your browser to get to the HP IT Resource Center page
    at

       http//itrc.hp.com

    Use the 'Login' tab at the left side of the screen to login
    using your ID and password.  Use your existing login or the
    "Register" button at the left to create a login, in order to
    gain access to many areas of the ITRC.  Remember to save the
    User ID assigned to you, and your password.

    In the left most frame select "Maintenance and Support".

    Under the "Notifications" section (near the bottom of
    the page), select "Support Information Digests". 
      
    To -subscribe- to future HP Security Bulletins or other
    Technical Digests, click the check box (in the left column)
    for the appropriate digest and then click the "Update
    Subscriptions" button at the bottom of the page.
      
    or

    To -review- bulletins already released, select the link
    (in the middle column) for the appropriate digest.      

    To -gain access- to the Security Patch Matrix, select
    the link for "The Security Bulletins Archive".  (near the
    bottom of the page)  Once in the archive the third link is 
    to the current Security Patch Matrix. Updated daily, this 
    matrix categorizes security patches by platform/OS release, 
    and by bulletin topic.  Security Patch Check completely 
    automates the process of reviewing the patch matrix for 
    11.XX systems.

    For information on the Security Patch Check tool, see
    http//www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/
    displayProductInfo.pl?productNumber=B6834AA"

    The security patch matrix is also available via anonymous
    ftp

    ftp.itrc.hp.com~ftp/export/patches/hp-ux_patch_matrix

    On the "Support Information Digest Main" page
    click on the "HP Security Bulletin Archive".
        
     
 E. To report new security vulnerabilities, send email to

    security-alert@hp.com

    Please encrypt any exploit information using the
    security-alert PGP key, available from your local key
    server, or by sending a message with a -subject- (not body)
    of 'get key' (no quotes) to security-alert@hp.com.

    Permission is granted for copying and circulating this
    Bulletin to Hewlett-Packard (HP) customers (or the Internet
    community) for the purpose of alerting them to problems,
    if and only if, the Bulletin is not edited or changed in
    any way, is attributed to HP, and provided such reproduction
    and/or distribution is performed for non-commercial purposes.

    Any other use of this information is prohibited. HP is not
    liable for any misuse of this information by any third party.
 ________________________________________________________________
-----End of Document ID  HPSBUX0111-175--------------------------------------

[***** End HEWLETT-PACKARD COMPANY SECURITY BULLETIN: #00175  *****]

Potential Workarounds:

Until patches are provided for other versions of Unix, One way to 
limit this vulnerability is to use TCP Wrappers (or similar "wrapping" 
technology).  This can be configured to limit access to the dtpscd daemon from 
untrusted networks/systems.  dtspcd typically listens on port 6112/tcp. 

Another option (or in addition to above) is to use packet filtering technology 
such as network firewalls to reduce the availability of the service to the Internet
(Note: firewalls are only one component of an effective security system; there are 
risks unwanted traffic will still get through).  

Finally, if the dtspcd daemon is not necessary for operations, disable and 
remove from configuration. By default, CIAC recommends any unused services 
be disabled, as dictated by best security practices.

[***** End Multiple Vendor Security Bulletins *****]

    Voice:          +1 866-941-2472 (7 x 24)
    E-mail:          doecirc@doecirc.energy.gov
    World Wide Web:  http://www.doecirc.energy.gov/